Dear All,
I have a doubt on working with timeouts and state table.
Below is the Same output
ASA# show conn protocol tcp101 in use, 5589 most usedTCP outside 10.23.232.59:5223 inside 192.168.1.3:52419, idle 0:00:11, bytes 0, flags saATCP outside...
Thanks Seb,
Let us consider the UDP packet crossed the firewall and there is no reply from destination and my TCP timeout is 2 Mins and i have configured embryonic timeout to be 40 mins and idle time out as 1 hr so in this will the connection table...