About krishnadig

krishnadig · 07-02-2018

Hello Friends, Looking for some industry practice or advise how to handle such situation proactively. I generally come across a situation where users report a disconnection of production application connectivity in recent past (few minutes or hours...

krishnadig · 05-20-2018

Hi, I need to gain access of a ASA Context using ASDM. I am unable to configure ASDM image syntax (asdm image disk0:/asdm-xxx.bin). However the same syntax is valid when used on system context. Please advise how I can fix this. FW1/contex1(config)...

krishnadig · 04-06-2018

HI, I have the below lines configured on my ASA version 9.7.x. Whenever a user with lower AnyConnect client version attempts to connect to this VPN, it prompts for upgrading the package. webvpn enable outside anyconnect image disk0:/anyconnect-win-...

krishnadig · 11-23-2017

Hello Experts, Please help with below scenario: Background: I need to configure NAT on a C3900 router to retain original IP address (referred as Identity NAT in firewall). Scenario: There is an existing configuration to perform unconditional NAT,...

krishnadig · 10-22-2016

Hello, I am planning to combine two ASA 5510 (used for separate S2S VPN requirements) into a single Cisco ASA 5512-X using contexts. I would like to know if anyone has deployed S2S VPNs in multi context mode, any known issues and how resource allocat...

krishnadig · 05-21-2018

I just realized I don't need additional configuration, except for specifying the ASDM image on system context. Config on system mode: asdm image disk0:/<filename>.bin Config on non-system context: http server enable http <mgmt host> <mask> <asso...

krishnadig · 04-13-2018

Thanks again for your input. I got some additional information on this: In the profile under “AnyConnect Profile Editor, Preferences (Part 1)” configuration have option to uncheck auto update for anyconncet client or you can set it as user controlla...

krishnadig · 04-06-2018

Hello RJI, Thank you for your response. Is there a way to push this setting on multiple workstations? Not sure if it its doable via ASA group policy.

krishnadig · 06-29-2017

Hi Julio, fantastic explanation! I have queries regarding multiple context. I want to create portchannel of firewall with sub-interfaces and assign it to contexts. example po1.10 to .20 for context1 and PO.30 to .40 for context 2. 1. Is such configur...

krishnadig · 10-22-2016

Hi Dinesh, Appreciate quick response! Thats a very useful information. Do you have any more information / recommendation for Context + VPN? (I am new to using contexts). And for resource allocation. Thanks in advance Krishna

Member Since	‎09-07-2015 11:11 AM
Date Last Visited	‎08-27-2019 06:58 AM
Posts	41
Total Helpful Votes Received	11

User Statistics

User Activity

Maintain history or capture of traffic passing through a router

ASDM access of ASA context

AnyConnect client image validation

Identity NAT on router

S2S VPN with multiple context

Re: ASDM access of ASA context

Re: AnyConnect client image validation

Re: AnyConnect client image validation

Hi Julio, fantastic

Hi Dinesh,