About StephenAbbs

StephenAbbs · 01-24-2019

I have DNAC running 1.2.6 code, and a brand new C9410R switch that I want to provision using PnP and then push a simple template to. I have finally got PnP to work (C9410R gets an IP address via option 43 from the DHCP server and the logs show a 'P...

StephenAbbs · 02-15-2019

Thank you for your continued help with this Adam - really want to see this working now! We tried the uplink from one of the SUP modules, and an ethernet port on one of the Line Cards. Unfortunately, I have to report that this was unsuccessful i...

StephenAbbs · 02-14-2019

Correct - using the Mgmt interface on the C4910R

StephenAbbs · 02-14-2019

Good command to know. After: *Feb 13 18:14:26.831: AUTOINSTALL: Setting hostname Switch.org.network from DHCP reply *Feb 13 18:14:28.835: %PNP-6-HTTP_CONNECTING: PnP Discovery trying to connect to PnP server http://172.16.0.2:80/pnp/HELLO*Feb 1...

StephenAbbs · 02-13-2019

Hi Adam, Yes, we were able to change to HTTP 80 (5A1D;B2;K4;I172.16.0.2;J80), cleaned the switch down, and tried again with the following console output: *Feb 13 16:06:01.771: port is 80*Feb 13 16:06:01.802: port is 80*Feb 13 16:06:07.775: %P...

StephenAbbs · 02-12-2019

I should have also shown our DHCP configuration on our ASA: 5A1N;B2;K5;I172.16.0.2;J443

Member Since	‎09-03-2018 09:11 AM
Date Last Visited	‎04-04-2020 06:49 AM
Posts	11

User Statistics

User Activity

DNAC PnP Day 0 Switch Provision with Template

Re: DNAC PnP Day 0 Switch Provision with Template

Re: DNAC PnP Day 0 Switch Provision with Template

Re: DNAC PnP Day 0 Switch Provision with Template

Re: DNAC PnP Day 0 Switch Provision with Template

Re: DNAC PnP Day 0 Switch Provision with Template