Hi, I have configured BD gateway with Unicast routing enabled but cannot ping gateway from the outside network but i can ping an endpoint learned under this BD L3Out is configured and we can reach the endpoint but not the gateway Anyone faced this is...
Hi, i have an issue when trying to configure L3Out using SVI over VPC with redundant firewalls using static route i cannot configure 4 IP addresses (same subnet) for two different VPC interfaces as each firewall uplinks should be single PC is there a...
Hi @Robert Burns i can reach outside network from BD SVI as per the below output Leaf-101# show ip route vrf TEST-tn:TEST-vrfIP Route Table for VRF "TEST-tn:TEST-vrf"'*' denotes best ucast next-hop'**' denotes best mcast next-hop'[x/y]' denotes [pre...
Hi @Sergiu.Daniluk all below already verified - BD subnet is externally advertised. YES- Contract between EPG and ExtEPG is configured. currently Policy control under VRF is "unenforced"- External Subnet for External EPG is configured to contain the...
Hi Sergiu, thank you for the reply i totally understand your concern what i have here is a requirement from client that a group of VLANs need to have separate L3Out and the other group of VLANs on another L3Out as the firewall has two VRFs but from t...
Hi Sergiu, thank you for you help the issue i found on the configurations i did that both SVI's should be same IP addresses, when i changed this it works fine but i had another issue after that, i am trying to configure 2 x L3out each for separate ph...
