Philip Olsson

Hi, System image file is "disk2:/ubr7200p-jk9su2-mz.122-33.SCG.bin" / Philip

I have this running on UBR7246VXR with NPE-G2.No reason to expect that it should not work for you. i...

Hi Paul, I want to have l2 isolation in the same vlans between 'downstream' ports. Same as a E-tree ...

Hi Rajesh, Yes, L3 does not fit into the overall design here. Currently I'm leaning towards doing Q-...

Hi Rajesh, I'm sorry but I have not been able to understand how to produce a configuration which doe...

Hi Ashmazabow, Sure, you can get systems that support this distance from Cisco. You probably need to...

Hi!No, that is not the issue.I booted the 4500x in 'entservices' to verify and there is still not 's...

Hi Casa, AFAIK, the 4500x is supposed to be sup7, but I tested the command on some regular 4500's wt...

Hi, 4500x/sup7le seems to be missing 'switchport protected'. I find this really strange but I'm now ...

Hey Guys,Cisco have finally reproduced the issue in their lab, so keep an eye on issue: CSCur84243Th...

Hi, We are still waiting for Cisco to get their lab togheter.But maybe you can do the following if y...

FYI: This is also happening on a WS-C3560CG-8TC-S withSystem image file is "flash:/c3560c405ex-unive...

Hi Roger,We are currently waiting for Cisco TAC to verify this issue, they are waiting for hardware ...