About Jason Szucs

Jason Szucs · 10-24-2015

Can EPC be applied to the Gig0 interface of an ASR 1002-X that's in the Mgmt-intf VRF? I've tried both of the following examples, but don't see any packets captured: monitor capture testcap interface GigabitEthernet 0 both match any buffer size 1mon...

Jason Szucs · 07-31-2013

After upgrading from 12.4(15)T13 to 15.2(4)M3 we have an EIGRP one-way peering condition. The Hub sees the remote, but not vice-versa. The condition can be temporarily resolved by deleting the tunnel from the configuration and then re-adding it. A...

Jason Szucs · 03-03-2005

I've noticed when I upgrade IOS on a 3725, that unless I specify 'boot system flash:<IMAGE NAME.bin>' the router will boot into ROMMON. I've verified the config register is set correctly. I've also tried having generic boot statements configured, i...

Jason Szucs · 02-06-2003

When examining the syslog output from my 3500xl catalyst switches I see sequence numbers pre-pended to the output even though the 'service sequence-number' is not enabled. For example:1787: Feb 6 08:40:19 est: %SYS-5-CONFIG_I: Configured from conso...

Jason Szucs · 10-24-2015

Hi Vinit,Thanks for testing this! I'm running version 15.2(4)S5. It looks like the syntax on my version is slightly different:router#monitor capture ? WORD Name of the Capture router#monitor capture test ? access-list access-list to be attach...

Jason Szucs · 08-07-2013

It's a one-way peering relationship with EIGRP. The peers on the encrypted DMVPN cloud are lost, but LAN peers are unaffected. I've opened a TAC Case to investigate.

Jason Szucs · 03-03-2005

I think I've figured it out. Here's an output from a 'show flash':Router#show flash-#- --length-- -----date/time------ path1 1038 Mar 01 2002 01:18:24 +00:00 home.shtml2 1658 Mar 01 2002 01:18:28 +00:00 sdmconfig-36xx-37xx.cfg3 ...

Jason Szucs · 02-24-2003

Cisco has posted a bug ID regarding this issue: CSCea26598

Jason Szucs · 02-06-2003

The sequence-number service isn't running. When I enable it, a syslog message has the following format:1810: 001937: Feb 6 10:30:09 est: %SYS-5-CONFIG_I: Configured from console by vty0 (10.18.28.24)Notice that my message now has two sequence numbe...

Member Since	‎02-06-2003 05:42 AM
Date Last Visited	‎01-05-2022 12:12 AM
Posts	10

User Statistics

User Activity

ASR Embedded Packet Capture on GigabitEthernet0

EIGRP One-way Peering in DMVPN

3725 Boots into ROMMON

catalyst logging - sequence numbers

Hi Vinit,Thanks for testing

EIGRP One-way Peering in DMVPN

Re: 3725 Boots into ROMMON

Re: catalyst logging - sequence numbers

Re: catalyst logging - sequence numbers