About courtschuett

courtschuett · 02-20-2019

Using CUCM 10.5 and Cisco 8865/9971 phones with SIP loads. I have calls going between them successfully and calls to PSTN working correctly. Calls from the phone to the CUCM and out to PSTN correctly have SDP in the initial INVITE. However, calls ...

courtschuett · 03-24-2011

Hello,I was wondering if there was a way to route calls based on a list of numbers, rather than a specifically matched incoming-called number.For example:In a range of 312-555-1000 thru 312-555-1999 I would like to route 25 speficic numbers to a diff...

courtschuett · 02-08-2005

Hello,I've got a Gold Fax fax server set up to run off of 4 FXS ports on an ICS. I have two small hunt groups set up to handle the inbound calls but I'm having trouble passing the caller id information into the fax lines.What I would like to do is t...

courtschuett · 02-20-2019

That worked for the CUCM -> SBC INVITE. I am trying to resolve the CUCM -> Phone INVITE. Enabling Early Offer (Best Effort) in the SIP Profile did nothing for the INVITE from the CUCM to the Phone. So this works: Phone --EO--> CUCM --EO--> SBC ...

courtschuett · 03-25-2011

That's a really good solution. We are doing that for digit manipulation for forwarding length. Unfortunately, the 15 rule limit makes this a little tricky. We had considered that option as well, so sorry, I should have included that as part of the...

courtschuett · 03-25-2011

Exactly. It's basically a random list of numbers. I've been trying to think ofdifferent options. So, for example:Let's say the range is 3125551000 - 3125551999We're looking to route numbers 1629, 1358 and 1281 to a CUCM 8.0 Cluster and the rest to...

courtschuett · 03-25-2011

Sorry, I think I got that backwards. How could it be done on a destination-pattern?This would be done for an inbound call from the PSTN through a SIP carrier and then to two different CUCMs. Basically, I need to split some calls to one CUCM and other...

courtschuett · 05-11-2005

We're not using AC either. The solution isn't in a CTI route point or anything like that. I understand what you're doing, but don't you already have a LG that goes to VM?For us, we use extension 3000. Anyone who dials that goes in to voice mail. ...

Member Since	‎02-08-2005 10:43 AM
Date Last Visited	‎02-28-2019 07:05 PM
Posts	12

User Statistics

User Activity

Need to Send Early Offer to SIP Phone from CUCM

Routing Calls Based on a List?

Caller ID on MGCP FXS Port

Re: Need to Send Early Offer to SIP Phone from CUCM

Re: Routing Calls Based on a List?

Re: Routing Calls Based on a List?

Re: Routing Calls Based on a List?

Re: Sending Broadcast Hunt Group to Voice Mail