About Patrick81

Patrick81 · 07-21-2019

Hi everybody,I'm using a Cisco 9300 with IOS XE 16.09, and I found something strange: Output drops. And I think that these output drops are related to AutoQoS. This is the interface configuration: interface GigabitEthernet1/0/1 switchport access vla...

Patrick81 · 06-12-2019

Hi everyone,I'm a bit helpless, but how do I remove the "no logging event link-status" from an interface config?! If I add a "logging event link-status" to the interface, the line is explicitly added to the interface. I thought the globally enabled "...

Patrick81 · 07-21-2019

Hello Giuseppe,thank you for your reply and for confirming my observation. If I understand your posting correctly, VoIP packets should be addressed by class map "AutoQos-4.0-Output-Priority-Queue", which is currently getting no traffic. Correct? I mi...

Patrick81 · 06-12-2019

Hi Mark, mew, okay. I tried this and I know that this is working. But it's an outage for each interface. An outage, just to save 22 or 44 lines in the config file. :) But thank you for confirmation! Best regards,Patrick

Member Since	‎06-17-2016 04:12 AM
Date Last Visited	‎07-24-2019 02:49 AM
Posts	4

User Statistics

User Activity

AutoQoS output drops - but why?

Remove "no logging event link-status" from interface config

Re: AutoQoS output drops - but why?

Re: Remove "no logging event link-status" from interface config