Hi experts, Has anyone tried out this new feature in the DNAC? So we have an SDA environment and I wanted to onboard APs using PnP and dot1x, any guides or reference that can help me guide through the process? Thanks.
Hi Experts, I wanted to discover all the different devices ( cameras, phones, printers, servers etc ..) currently connected to the access switches, any recommendations what are some of the best commands (IOSXE) or the best way to discover what is con...
Hi Experts, We have a SDA environment, the Sponsored Guest Portal (Login Page) is created and pushed by DNAC to ISE. The behavior we are seeing is every time our wireless guests connect to the network, they complete the sponsor flow and also see the ...
Hello, We have Cisco Aironet 1800s sensors deployed in our SDA network. Following is what I would like to get more understanding on.1. For the RADIUS test that the sensors can perform, I was reading somewhere that it’s tricky as the sensor do not hol...
Hi there, On the DNAC, I enabled AAA and used Radius and ISE for network devices administration. The Radius attributes my authorization profile is pushing are ACCESS_ACCEPT and Cisco-av-pair= SHELL:PRIV-LVL=15. I'm able to login to the WLC via SSH us...
Heres the attachment. We will be upgrading the WLC soon. The user gets an IP and completes the portal but I believe stays in webauth state and disconnects. Theres one statically assigned on DNAC and that same one ISE uses in the Auth profile that ass...
Yes, it helped. We in our setup are using the management ports and I can see on ISE Live logs DNAC is connecting to the NAD using tty port but spamming the live logs, anyway to avoid or restrict showing so many logs?
If we configure our environment to use AD for external authentication for device administration, we won't be locking out dnac from managing the devices right? So for example, as a primary source, we want to use our AD credentials to login to all our ...
I do see out of 63 APs on CH 165, 23 have less than 15 SNR. Could that be one of the reason causing High Channel Utilization?Why not use CH 165? Is there something bad about that channel?
