About saiyen_2002

saiyen_2002 · 03-16-2011

I am trying to configure qos on my cisco switch for voice traffic. I have managed to setup voice vlans ok on my ports like the followinginterface FastEthernet0/3 switchport trunk native vlan 10 switchport trunk allowed vlan 10,20 switchport mode trun...

saiyen_2002 · 03-15-2011

I have been reading through the lots of docs on how about configuring voice vlans on cisco switches, but almost all of them assume you have cisco IP phone. I can not find a definitive guide on how to configure voice vlans with non cisco phone, no CDP...

saiyen_2002 · 03-17-2011

Eugene, nice bumping into you again.OK, so I do not need global mls qos.How about configuring the cos-dscp map? It seems that In this switch of mine I can not configure anything to do with dscp. Inlcuding setting mls qos trus dscp, which you advised ...

saiyen_2002 · 03-15-2011

Thanks for all the help Eugene. I will try all this out at work tommorw.

saiyen_2002 · 03-15-2011

Thanks for that Eugene, I am almost there. One last thing.How would I configure the port that is connected to my asterisk trixbox pbx? I need the IP phones to be able to log into the pbx which is on the same subnet. There is no tagging coming from t...

saiyen_2002 · 03-15-2011

Hi Eugene,Are you saying that the simple way ofswitchport access vlan 100switchport voice vlan 200will not work at all? Or that the method you mention is the better one. My Snom360 IP Phone, does not have CDP, but it can tag the traffic with VLAN and...

saiyen_2002 · 03-15-2011

Thanks leolaohoo. What if I want my pc data to gon on the default native VLAN1. Do I still have to do switchport access vlan 100?Also, how would I configure the port that is connected to my PBX. I am using asterisk trixbox which will be on the same s...

Member Since	‎03-15-2011 02:07 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	7

User Statistics

User Activity

no mls qos command in 2950?

qos on cisco 2950

Re: no mls qos command in 2950?

Re: qos on cisco 2950

Re: qos on cisco 2950

Re: qos on cisco 2950

Re: qos on cisco 2950