About castanares_1001

castanares_1001 · 04-11-2011

I am attempting to configure two ports for LACP and I am only seeing one interface as member under the PortChannel that I created.I am also seeing a Suspended interface on one of the ports.This is my configurationinterface Port-channel12 description ...

castanares_1001 · 04-11-2011

HI The configuration that I used is on the first thread of the discussion.

castanares_1001 · 04-11-2011

This is what I am gettingPort-channel12 is up, line protocol is up (connected) Hardware is EtherChannel, address is 0024.13c4.248c (bia 0024.13c4.248c) Description: MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec, reliability 255/255, txload 1...

castanares_1001 · 04-11-2011

Yes the servers are configured LACPI did a "shut" & "no shut" on both interface.I added Interface Protocol first and then configured the interface after with Channel-group # mode "active"It's still only seeing one member out of two.

Member Since	‎07-27-2010 03:51 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	4

User Statistics

User Activity

Cisco 3750 suspended interface when configuring LACP

Re: Cisco 3750 suspended interface when configuring LACP

Re: Cisco 3750 suspended interface when configuring LACP

Re: Cisco 3750 suspended interface when configuring LACP