About cmarsteller

cmarsteller · 07-20-2007

I am having a problem understanding how a packet is going to know that it needs to get evaluated by the IDSM if it is being sent to a host on a different vlan. First lets say that the server is on a vlan that is being pair and the server host is conf...

cmarsteller · 04-14-2011

My suggestion would be to use the internal router as an dns forwarder.. One problem is it violates the regulations to enable that.

cmarsteller · 08-17-2007

http://www.cisco.com/en/US/customer/products/hw/vpndevc/ps4077/products_configuration_guide_chapter09186a008055df87.htmlSorry meant to post this one.

cmarsteller · 08-17-2007

Absolutely, here is one for you, http://www.intersectalliance.com/projects/SnareBackLog/index.htmlThey sell a full blow one but I don't know how it is we use Cisco MARS to do event correlations.Heres the snmp link you need.http://cco/en/US/products/h...

cmarsteller · 08-17-2007

I would recommend using a exploit utility to determine if the system is actively blocking/alerting. I have used metasploit in the past using the realvnc buffer overflow to inject a paylod and the idsm-2 have stopped it. You verify that it was stopped...

cmarsteller · 08-17-2007

Hope this helps. We run ECLB with inline vlan pair mode. Heres a link to the manual and a link to my orginally posted question, that I figured out.http://www.cisco.com/en/US/products/hw/vpndevc/ps4077/products_configuration_guide_chapter09186a008055d...

Member Since	‎07-20-2007 08:32 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	9
Total Helpful Votes Received	3

User Statistics

User Activity

Hybrid 6500 IDSM-2 inline vlan pair mode

Re: ACS 5.2 Edit Hosts File

Re: IDSM-2 Password and config guide

Re: IDSM-2 Password and config guide

Re: test my ips

Re: Changing from Promiscuous mode to In-Line mode