Hello,I have created a Credential-Set with SNMP v2 and SNMP v3 credentials and enabled at the discovery settings the fallback option from snmp v3 to v2. For the discovery this setting works but at the inventory collection and the UT it seems that the...
Hello,does anybody know if it's possible to change the Client only then to the Auth VLAN if the check fails? We want to authenticated the pc by the MAC-Adressfilter and than the user with the NAC-Agent. But the pc should be always in the default Acce...
Hello,I have the problem that our ciscoworks server gets out of memory after few days. The memory utilization is always getting higher an higher (above 95%). Sometimes it is only after 3 days and sometimes it is after 1 week. So it happens not regula...
I have made a Default Credential Set which includes the SNMPv2 and the SNMPv3 credentials.Now I have solved the problem by manually deactivating the SNMPv3 credentials for the SNMPv2 devices.
Yes, first we want to pass the PC by the MAC-Address and after the User is logged on, we want to check the PC for anti virus software and so on. And only if the check with the NAC-Agent fails, the PC should come into the Auth-VLAN.
I solved the problem by doing a manuall re-initialize of the ani.db.How it works:Stop CiscoWorks, move the original file to some other location:$NMSROOT\databases\ani\ani.db (and ani.log if it exists) file.Copy the ..\orig\ani.dborig, to $NMSROOT\dat...
