If this needs to a different discussion location; just let me know. So attempting to get Ethernet CFM config working on the NCS 540 running 6.5.x. No issues on the ASR 9ks. What I find is I can use the same config from the 9ks on the NCS 540s; o...
Would any have commands for the NCS 540 to view what drops are occurring on the router?
show drops ; command doesn't exist
show contr tengig 0/0/0/23 stats ; isn't showing any errors or drops
show contr ? ; options and output is pretty cryptic
...
Ended up figuring out what I was missing a few hours later. Needed the ' id ' setting with the service command. ex: ethernet cfm domain <DOMAIN> level 5 id null service <SERVICE> down-meps id [ icc-based | number ] But I need to use icc-based fo...
Further snipit; looking at just that interface TenGig0/0/0/11 from that command output. I remove the packet data as it's the same as what I already posted. As far as the capture output.
[25] Dec 3 16:24:42.610, len: 77, hits: 1, buffhdr type: 1 ...
That command does work. Here's a snipit of the output.
#show captured packets ingress location 0/0/cpu0 Mon Dec 3 18:11:37.014 UTC-------------------------------------------------------packets dropped in hardware in the ingress directionbuffer ove...