I installed the new ncs version (1.1.1.24-small), with success. Later I will use a temporary license for testing.I use the licing center and get a license but I get allways following message : "UDI of file not match the system"Following parameters :...
Hello,I would like to add user (mac-addresses) to the ACS4.2 via RDBMS with a .csv file. How can I simultaneously addsupplimentary user infos, like Real Name and Description ?Have anyone maybe a sample csv file for such a case ?Ulrich
Is it basically possible to connect the BBSM Dashboard via the management IP-Address :http://management_ipaddress:9488/www instead http://external_ipaddress.....http://internal_client_ipaddress...I try this without success. I can, of course pingthe...
Hello,I have the same problem. Update IBM (T41)to 4.X --> same problem.It is not possible to use Centrino and Cisco AIR-CB21AG-E-K9 on the same laptop at the same time. If I removed the cisco software from my laptop , Centrino 2100 3B works then wit...
Hello,I had in the past often recovered the AP image.Sometimes it was necessary :ap:flash_initap:resetImportend IP address client: between 10.0.0.2 ..30/8File : c1200-k9w7-tar.default(renamed original file)I use 3Com TFTP serverregards Ulrich
Hello,the purpose of the global command is following :(I can send you a real sample AP<->WGB)If you configure on the central-site (AP) 2 VLAN,sin my sample 2--> 1;211)first for management and the second for the user data,is it not possible for a clie...
Hi,this is depend on :1. what location : ETSI/FCC2. what terrain3. antenna height 4 my be disruption, (interference)5. cable loss Note : the real throughput if you connected with 54 MBit/s is about 24 MBit/s (netto) regards Ulrich