About ngull

ngull · 04-01-2012

This document explains behaviour of Cisco routers running IOS when configuring soft-reconfiguration InboundPossible scenarios:1. - When the BGP neighbour is not route refresh capable:1.1 No soft-reconfiguration inbound configured1.2 Soft-reconfigurat...

ngull · 03-29-2012

This document explains behaviour of Cisco routers running IOS-XR when configuring soft-reconfiguration Inbound Possible scenarios:1. - When the BGP neighbour is not route refresh capable:1.1 No soft-reconfiguration configured1.2 Soft-reconfiguration ...

ngull · 07-26-2019

Thanks ! it is quiete importan reload times make sure any switch syncs with old state from another.

ngull · 11-22-2018

Apologies, I copied the wrong output I meant to put this one. APIC# fabric DC1_101_i06-93180FX-01 show interface transceiver---------------------------------------------------------------- Node 101 (DC1_101_i06-93180FX-01)--------------------------...

ngull · 11-22-2018

Hi, it's a bit late but I found your question as I'm literally trying to do the same. I found this command you can run from APIC CLI controller APIC# fabric DC1_101_i06-93180FX-01 show inventory ? <CR> Carriage return chassis system inventory cha...

ngull · 05-15-2012

Excellent document. I just forwared it to my cust.Regards

ngull · 12-02-2010

Ryan, I configured a similar example using http 80, which can help you. Scenario: FW1: outside 10.0.01/24 FW2: outside 10.0.0.2/24 Inside 192.168.1.0/24 ins...

Member Since	‎12-02-2010 04:16 AM
Date Last Visited	‎03-13-2024 12:02 AM
Posts	6
Total Helpful Votes Received	16

User Statistics

User Activity

Route Refresh / Soft-reconfiguration Inbound on IOS

Route Refresh / Soft-reconfiguration Inbound on IOS-XR

Re: Factory reset APIC and nodes

Re: SFP inventory from ACI Fabric

Re: SFP inventory from ACI Fabric

Re: Troubleshooting VPN issues on ASR - where to start.

Re: port forward/PAT to host behind remote VPN endpoint