Has anyone been able to use the PGW snooper application to capture M3UA/SCTP traffic? I've tried to select the port number in seedfile.txt but does not appear to work. Any help and seedfile entries would be appreciated.
Hi SathyaI guess you are using PGW in Signalling Control Mode (not Call Control Mode)? Are you also using the Integrated SLT function on the MGW?The Session-Set port carries the SS7overIP Signalling backhauled to the PGW and the RLM Port carries the ...
Hi JuanNot sure if you cleared this, but here are my thoughts:From your IOS debug I see you are sending SIE and receiving SIN. Almost certainly a mismatch in the Point Code and SLC as Anikas illustrated. It appears you are trying to establish a link ...
Hi BijuFirst thing to say is that the PGW can operate in either Signalling (Nailed) mode or Call Control (Switched) mode - not both at the same time. One or the other. The setting is made in the XECfgParm.dat file. Look for the parameter:engine.SysVi...
