Hi Arun,Have you got an SVI (VLAN Interface) configured for VLAN 1 with the gateway configured? ie. 192.168.0.254/24Can you paste in -: sh ip route sh runThanksChris
Hi David,HSRP will be the best solution for the Desktop PC's.GLBP wont be much use as the Access switch connecting to the Collapsed Core switches willblock one path, unless you put half of you desktops on one VLAN and the other half on the VLAN and r...
Hi Eric,The cisco SAFE Architecture is a good place to start.http://www.cisco.com/en/US/netsol/ns954/index.htmlBut on a whole,a seperate switch connected to a firewall (IOS Firewall or ASA) means that you can configurePrivate VLANs on the switch port...
Guys,Can I make a point that all the Cisco switches come out with a Multilayer Image when purchased.Either SMI - Standard Multilayer Image or EMI - Enhanced Multilayer ImageThe difference if that the SMI supports static routing, HSR...
Hi Senthil,Just a few things.You may want to add the following to your HSRP config to make it more deterministic -: standby 1 timers 1 3 standby 1 priority 110It doesn't solve the STP issue, but fixing inconsistancies helps.I notice that you are ...