About MATTHEW BALYUZI

MATTHEW BALYUZI · 04-21-2005

I've just upgraded a couple of our WDS master access points to 12.3(4)JA and find that they are no longer able to authenticate with wlse.Has anyone else seen this?Other access points are authenticating against the WDS master with no problem, but ther...

MATTHEW BALYUZI · 02-04-2005

I need to clear out the rogue access point data from WLSE. There are now in excess of 30,000 rogue access points listed and Location Manager is struggling (running out of Java Heap memory). Any idea how to do this? Deleting them one at a time is goin...

MATTHEW BALYUZI · 12-06-2012

Shame, there is at least on version 7.3 on our 5508s.Could also try "show capwap client config" on the AP. At least on the firmware we're running there's a "Led State Enabled" line in the output with the current LED state.

MATTHEW BALYUZI · 12-06-2012

What does "show ap led-state " on the WLC show? (If your WLC firmware version supports that command).

MATTHEW BALYUZI · 08-19-2011

And just because it's not a supported configuration, doesn't mean it won't work... I never claimed it was "supported", whatever that means. (It's a perfectly valid bit of IOS config, just not implemented in the GUI, and our SE was aware of it at the ...

MATTHEW BALYUZI · 07-29-2011

Surendra BG wrote:No its not possible... its always 1:1 mapping between the SSID and the VLAN in autonomous infrastructure..I can assure you that it is possible - we ran with two ssids on the same radio with different securiy settings for about a yea...

MATTHEW BALYUZI · 07-29-2011

I have done this in the distant past.Don't think you can do it through the web interface, but from the CLI try putting the wireless sub-interfaces into the same bridge group.Afraid it's so long since I did this that I don't have a configuration fragm...

Member Since	‎06-18-2003 12:36 AM
Date Last Visited	‎03-14-2019 11:42 PM
Posts	27

User Statistics

User Activity

WLSE not authenticating with 12.3(4)JA?

WLSE Need to clear Rogue APs from list

Cisco Aironet 3502i AP has no light

Cisco Aironet 3502i AP has no light

mutiple SSIDs using the same VLAN

mutiple SSIDs using the same VLAN

mutiple SSIDs using the same VLAN