About yong1794

yong1794 · 03-08-2010

Hi,It appears that multicast routing is not supported by the FWSM 4.1 when running in multiple context mode.Does anyone know if this support is on the roadmap ?Thanks

yong1794 · 06-09-2009

Hi all,I have a question about MESH AP Path selection.If a Root MESH AP down, the other MESH AP can connect another backup Root MESH AP.But the MESH AP is not fall back to first Root MESH AP which back to noraml, even though the Backup Root MESH AP's...

yong1794 · 03-29-2009

We are going to upgrade 4.x WCS to 5.x version.I'd like know the current congiurations like map and policy in WCS are existing after WCS version upgrade.

yong1794 · 12-07-2008

Hi!I'd like to know a wireless client can associate to the RAP(Roof MESH AP). And can the MAP work like a workgroup bridge?Thanks.

yong1794 · 09-08-2008

I'm not able to establish with console of the AP1131AG. there is no response on CLI.and, the AP shows the red led on radio and no light on the other leds.Is this firmare problem? or any other clues of this failure?Thanks.

yong1794 · 06-23-2009

Hi,We are using LAP1520(latest WLC version) and they are configured automatic power and channel set.We have an another problem with LAP1520 and AP1242 bridge mode AP(IOS based). the AP1242 bridge AP(using 2.4GHz link to MESH AP)is connected to IP Cam...

yong1794 · 12-10-2008

Thanks your helpful reply.I have one more question about MESH solution.I know that the controller based wireless lan infrastructure with WCS and Location server can provide location based services.Can MESH solution also support LBS? and How accurate ...

yong1794 · 06-28-2008

I've attached the blocked log in ACS and SSL-VPN log.

yong1794 · 04-07-2008

Thanks, your reply.The machine authentication is ok and "password changes inside PEAP using MSCHAPv2" is already configured.This issue happen to violated user who did not change password in 90day. the other users are can change passwords and auth wor...

yong1794 · 03-11-2008

The disconnection happen whenever wired and wireless client are connecting wireless remote desktop hosting LWAPP client (windows XP). The hosting client is re-association a few seconds later after disconnected.We are using a controller image version ...

Member Since	‎03-20-2003 04:21 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	90

User Statistics

User Activity

Any news about FWSM multicast support in multi context ?

MESH AP path selection

WCS upgrade question

RAP with wireless client

AP1131AG does not work and shows red on radio led.

Re: MESH AP path selection

Re: RAP with wireless client

Re: Auth issue on ASA, ACS, AD

Re: AD passwords renewal issue

Re: LWAPP client disconnecting from Terminal service(Remote Desk