About NeilT2

NeilT2 · 01-17-2020

Hi All, I'm trying, and failing, to apply an input service-policy to either a physical or Vlan interface. The policy is Marking and from what I've read this should be achievable. The current config is listed below. Any comments would be welcome. Ch...

NeilT2 · 12-19-2018

Hi All, I'm looking at using either a WS-C3850-12XS or a C9500-16X switch for an internal layer 3 node which will be used as a Route redistribution device between BGP and OSPF. I've found in the past that Cisco often limit the number of BGP routes...

NeilT2 · 01-23-2020

Solution.After running several tests I have found the solution so I thought I'd add it here so anyone else experiencing the same issue might find this useful. The documentation states extended access lists can be used to classify traffic. This is tr...

NeilT2 · 01-19-2020

Hi Mark,The switch is running LANBase. Why do you believe I might need IPLite? Is it because I'm using Extended access-lists? The documentation doesn't state which type of access-lists can be used with LANBase software. I'm fairly sure the config...

NeilT2 · 06-06-2019

Hi Hector, the BDI is untagged and from what I read untagged BDIs do not run Spanningtree. It is a layer2 broadcast domain.

NeilT2 · 12-19-2018

Thanks for the input Joseph, that's very interesting. Hopefully someone has come across the limits either through experience or by documentation.

NeilT2 · 12-19-2018

Hi Georg, The previous post was an example of an old deployment. This new design will probably have anything up to 3000 BGP routes although that's a very rough estimate as I don't have access to the customers network. I need up to 10G throughput a...

Member Since	‎11-06-2018 02:32 AM
Date Last Visited	‎03-04-2020 12:17 AM
Posts	10

User Statistics

User Activity

Applying Policy-map to 2960X LanBase switch

BGP route capacity on 3850 and cat9500 switches

Re: Applying Policy-map to 2960X LanBase switch

Re: Applying Policy-map to 2960X LanBase switch

Re: Traffic path determination in a BDI network

Re: BGP route capacity on 3850 and cat9500 switches

Re: BGP route capacity on 3850 and cat9500 switches