About scsc_tech

scsc_tech · 07-09-2019

Any word from Cisco on release of 16.11.x on The cat 3k series?The new AVC feature in DNA center says it requires 16.11.1s or later.

scsc_tech · 07-08-2019

I want to strengthen our ISE password policy a bit, but I wanted to check to make sure this only affects passwords when they are changed or a new user is created? I don't want to have any negative affect on the current passwords in place for the ISE ...

scsc_tech · 07-01-2019

We recently added a 3850 switch to the fabric, but noticed that the peer link did not get configured in the switch configs on either the boarder router or the new switch. Is there a way to configure the peer link without deleting the switch from inve...

scsc_tech · 06-18-2019

Im looking forward to upgrading from 1.2.10 to 1.3 and according to the release notes I should be getting an upgrade banner. Has the general release been held back? https://www.cisco.com/c/en/us/td/docs/cloud-systems-management/network-automation-and...

scsc_tech · 06-14-2019

Since ISE gains the most sensor data about an endpoint after it has received its DHCP lease, I need this to occur before I can create a well designed profile for the new device.What I don't want to do is open up DHCP to any device that plugs into the...

scsc_tech · 06-21-2019

Given the recent security vulnerabilities for versions <1.3 I hope they fast-track this rollout.9.3 out of 10 on CVSShttps://threatpost.com/cisco-dna-center-critical-flaw/145849/

scsc_tech · 06-17-2019

Thank youI am familiar with creating policies to match these objects, I was hoping there was a "manual override" in a sense where I could choose the device from the endpoints list and manually assign the authz policy temporarily.

scsc_tech · 06-14-2019

ThanksI have device sensor. I guess that is sufficient.

scsc_tech · 06-14-2019

Gotcha, I asked because this is posted in the DNA forum.Have you read? https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/16-10/configuration_guide/syst_mgmt/b_1610_sys_mgmt_9500_cg/cisco_smart_licensing_client.pdfCheck ...

scsc_tech · 06-14-2019

I havent seen this particular issue, but my wired client health is all messed up with 1.2.10Check your network settings and make sure you have DNA center checked for SNMP server and SYSLOG server. These are required for assurance.

Member Since	‎11-07-2018 12:11 PM
Date Last Visited	‎07-17-2019 10:16 AM
Posts	58
Total Helpful Votes Received	26

User Statistics

User Activity

Catalyst 3k IOS-XE 16.11.x

Strengthening ISE password policy

Configure peer link after LAN automation completes

Upgrade to 1.3 - No banner

Manual Authz assignment to new endpoint

Re: Upgrade to 1.3 - No banner

Re: Manual Authz assignment to new endpoint

Re: IP helper for ISE DHCP profiling

Re: Cat9500 16.11.1 missing "license smart register idtoken"

Re: DNAC 1.2.10 Dashboard charts show no data under network devices although receiving the client data from controllers