Hi everyone,I've a small issue with my QoS Policy. I'm working on a C3560X-24T-L (or 48T-L), which is located on the LAN of a customer, and I want to do this :- on all interface, except Gi0/1, I need to classify all the traffic : - Voice & TSE : ...
Hi all.I have a simple question : how can I power a Cisco 881 in 48 VDC ?I need the same thing with Cisco Metro 3400, but Cisco ME 3400-24TS DC model answer my question. For Cisco 881, I don't know :OThank you for your help !Best regards,Aurélien
Hello,I would like to know how I can apply some policy-based routing, based on the source of the flows. For example, all flows from the Internet go one way, and all private flows go through the other way.I try to create this ACL :Fore private : ip ac...
You mean, in the Policy-map, I need to do this :policy-map INPUT class class-default trust dscpAnd that's all ?I'll try this.Thank you for you help ;-)Aurélien
Well, 1st solution does'nt work. In fact, I don't even know if I can match any other traffic... BUT, I put "mls qos trust dscp" on all incoming interface (gi 0/2 -24) and it seems to be working. And I also can rewrite the DSCP with the different poli...
Mayber this ^^ : Cisco IOS Software, C3560E Software (C3560E-UNIVERSALK9-M), Version 12.2(55)SE5, RELEASE SOFTWARE (fc1)Here is the config, just like I described before :mls qos srr-queue output dscp-map queue 1 threshold 1 48mls qos srr-queue output...
Interesting fact :When the DSCP is 0 because I SET IT at 0, the packet goes to the right queue (queue 4). When the packet doesn't match any ACL, he keeps a DSCP at 0 BUT it goes to the wrong queue (queue 2).What is the difference between a default DS...