I'm currently facing some difficulties to access the internet on one of my vlan's.
Here is my setup:
I've got a internet router (ISP) = 192.168.1.1
With a cat5 cable I've connected my router to my layer3 switch= 192.168.1.20.
Below I listed some screesnhots of the IPv4 Interface and the routing.
After the configuration of my vlan2 I set up dhcp server with the following settings:
My issue is that I get a ip adress and the configured options from the dhcp-server but I'm unable to access the internet. I've set up a static route and can succesfully ping the 192.168.1.x network from my vlan2= 192.168.2.0 network.
Do you guys have any idea what could causing this problem.
On the client side on the network adapter the connectivity status shows no Internet Access.
If I do a tracert to 126.96.36.199 from the client after two hops:
and 192.168.1.1 I get multiple timed out lines....
Thanks for any hint and idea.
Ps: I've setup the following route on my ISP router. (192.168.1.1)
... View more