About ampdog

ampdog · 11-29-2018

I have a WS-C3650-48TD Catalyst switch running IOS 3.06.04 configured using Flex Link. When I try to use the same configuration on a switch running IOS 16.3.7 the command is not there under the interface. see below... Is there another way or techniqu...

ampdog · 12-03-2018

THANKS Paul!!This worked perfectly.!event manager applet If_Primary_Trunk_Down trap event syslog occurs 1 pattern "Line protocol on Interface GigabitEthernet1/0/47, changed state to down" action 0001 cli command "en" action 0002 cli command "conf ...

ampdog · 11-30-2018

Thanks Georg! Would you say that the simplest / best way to accomplish this is to increase the STP cost on the secondary port as below?Or, with "spanning-tree vlan 6 root primary" and "spanning-tree vlan 6 root secondary" on the other 2 switches?Than...

Member Since	‎11-29-2018 01:11 PM
Date Last Visited	‎01-23-2019 12:05 AM
Posts	3

User Statistics

User Activity

Flex Link (switchport backup) IOS 3.x to 16.x

Re: Flex Link (switchport backup) IOS 3.x to 16.x

Re: Flex Link (switchport backup) IOS 3.x to 16.x