Hello, I have a cisco 2960X-24TS-L with an access list to restrict access to a single server. I have attached a diagram of the ACL and what we're trying to accomplish. It DID work for about 6 months. The VM's on the server host need to see the other ...

I have a 2960X POE switch that I have used to isolate a server. I am using an ACL to limit user access to it and also have a backup appliance that needs to connect to the server to keep the backup's up to date. BUT... the backup server keeps losing c...

Hello,I have a 4351-ISR and am experiencing Heavy packet loss with one of the subnets I have uplinked. Is there a command to use in order to look at the health and or logs that the NIM might have which aren't showing on the traditional show commands?...

Is there any way to use a SM-ES3G-16-P service module (originally for a 3945) on a 4351? It appears you can use the SM for the 4351 (SM-X-ES3-16-P) on the 3945. Can we not go the other way?

We have a Radius(RSA) server that provides MFA or our Remote VPN connections. Is it possible to add a secondary Radius IP under the "Radius Server Group" in the case that one Radius sever goes down the other will still authenticate the authentication...