Hi guys, i have my isp modem with dhcp (wich is by default, and i cant have access to that device) connected to my 1841 router and then a 2960 switch also with DHCP (i configured this DHCP pool) facing my network. Sometimes, and i dont know why, when...

Hi guys. Everytime i telnet into one of my cisco devices i have to issue the terminal monitor command in order to see any logging messages. Is there a way to set this command by default on every vty lines?  Thanks! 

Hi everyone! Im doing some lab with one of my 1841 routers, and i want to load the ios from my tftp server but i cant get to it... The tftp server has the right permissions (already copied my original ios from flash to the tftp and everything went we...

Hi guys! Im doing some labs and want to try an SNMP server to check my local network (currently 1x 1841 router and a 2960 switch) and i want to monitor them from UBUNTU.  I just did this on a vmware machine running windows, and it work out well (PRTG...

Hi guys! Im doing some labs and want to try an SNMP server to check my local network (currently 1x 1841 router and a 2960 switch) and i want to monitor them from UBUNTU.  I just did this on a vmware machine running windows, and it work out well (PRTG...