Setup is as shown in the above diagram. I'm trying to establish a EoGRE tunnel between a linux x86 machine(PC2) and Cisco ASR 1002x(WAG). The EoGRE packets are coming from eth0 of PC2 to Gi0/0/0 of WAG. Packets captured on Gi0/0/0 are proper. But de...

I need to make a EoGRE tunnel from a x86 linux PC to cisco ASR 1002x. I verified tunnel between PC's and similar approach followed with router.Following are the commands used in routerWAG(config)#interface Tunnel1%LINEPROTO-5-UPDOWN: Line protocol on...