About remco.gussen

remco.gussen · 04-26-2011

Hitoday i upgraded our WLC4402 from 7.0.98.0 to 7.0.116.0. After the upgrade (also bootloader upgrade) the Aironet 1142 AP's do not joint the controller anymore. Error in log:*spamReceiveTask: Apr 26 11:30:46.301: %CAPWAP-3-DISC_INTF_ERR2: capwap_ac_...

remco.gussen · 12-21-2010

HiI'm experiencing very slow Windows domain logins over an IPSec VPN connection. The AD is in Site 1, some users are in Site 2. Two Cisco ASA firewalls connect both sites by an IPSec VPN over the Internet.I made some registery changes on the Windows ...

remco.gussen · 11-04-2009

We configured 802.1x for the wired network. Some pc's and printers do not work. This is the message on the switch:DOT1X-5-FAIL: Authentication failed for client (Unknown MAC)on interface fa0/1All pc's work with digital certificates and EAP-TLS on the...

remco.gussen · 09-22-2009

I tried to make a NAR (IP based or CLI/DNIS based) to permit access from AAA client 1.2.3.4 for ACS group 10.AAA client 5.6.7.8 must use group 20, but users still get authenticated in Group 10. Auth is ok, but overall process failed. Why does NAR wor...

remco.gussen · 09-22-2009

I've got some problems with NAR's in ACS 4.2I have got two AD groups: 1=Wired Users, 2=Wireless UsersWired USers = ACS group 10, Wireless Users = ACS group 20.I want to put wired users via 802.1x in VLAN 10 on the access switches.I want to put wirele...

remco.gussen · 04-26-2011

Ok, you are all right!I changed the config. Now the AP-Manager and Management Interface are in same VLAN and everything is working perfectly..Again, thank you for the help.RegardsRemco

remco.gussen · 04-26-2011

Ok, normally i put the AP-Manager and Management Interface in the same VLAN, together with the AP's. I "inherited" this configuration, so i'm gonna try to get this work by fixing it.. Keep you posted.Strange thing is that the AP is now connected to t...

remco.gussen · 04-26-2011

Thank you for the answer.. This is strange...My AP-Manager interface is in VLAN 21, so are the AP's. The Management Interface is in VLAN 900... I assume the AP does a broadcast in the VLAN 21 segement and the AP-Manager interface receives them.. Isn'...

remco.gussen · 01-10-2011

Hi NamanI think you mean the "sysopt connection tcpmss" command. The other command if for a router. We are using a Cisco ASA firewall here.What does the command do ? Correct me if i'm wrong, but lowering the MTU setting on the client to 1000, or lowe...

remco.gussen · 01-04-2011

Hi NamanI already thought it would have something to do with fragmentation. I adjusted the MTU setting on the Windows XP client to 1000 by regedit. But same, slow performance.. I've noticed that the MTU is about 1273 bytes, by the ping -f -l 1272 com...

Member Since	‎06-20-2005 11:26 AM
Date Last Visited	‎02-23-2021 02:16 AM
Posts	152
Total Helpful Votes Received	9

User Statistics

User Activity

AP doesn't join after upgrade to 7.0.116.0

Very slow Windows domain login over IPSec VPN

(Unknown MAC) on switchport

NAR's ACS 4.2

Network Access Restriction ACS 4.2

Re: AP doesn't join after upgrade to 7.0.116.0

Re: AP doesn't join after upgrade to 7.0.116.0

Re: AP doesn't join after upgrade to 7.0.116.0

Re: Very slow Windows domain login over IPSec VPN

Re: Very slow Windows domain login over IPSec VPN