Hi,
I have issue with the wireless users are not getting IP address from the IOS DHCP server,
the setup of the network is straight forward
WLC---------CORE----------DIST-----------ACC--------AP---------------User
the DHCP scope has been created ...
Hello, Can anybody tell me, is it best practice to have GM and WAN Agg routers combined in one router in DC, instead of having GM router behind the WAN Agg router ? If the best practice to have WAN Agg router and GM router separated ? can you please ...
Hello guyz,I have CUOM ver2.3 installed. I can see all my voice devices ( CCM and Gateways) in Service Level View.the problrm is that I can't see any IP phone registered on subscriber, while other phones that are registered on publisher are available...
Prasaxen, thanks for your support.
I have found the issue, it was command line in my core where the DHCP scope has been configured causing this miss
"ip dhcp use subscriber-id client-id" once I took it off everything worked as expected
suddenly, I can get IP address, but whenever I tried to connect other laptop or phone to the same SSID I am getting the same IP address in all devices.
Sorry, I didn't get your question
if you mean flexconnect, no I am using the normal mode which all the APs are registered to WLC and all the users VLANs are created on the core and trunked to WLC
on the access switches the AP's port configured as a...
