hi all,got a 3850 stack and the top one ie switch one is primary, i need to recover or make a new enable password and login for myself, has anyone got the steps to do this pleasethanks,rob

hi all,when i try to ssh in to a switch i get a connection refused on port 22ssh robert@10.110.10.4ssh: connect to host 10.110.10.4 port 22: Connection refusedthanks,rob

hi all,if i change the switch's ip and hostname, can people still ssh in the switch with there pub key's or will they need to put back in there pub keys again as i need to redo thecrypto key generate rsathanks,rob

trying to recover an admin password for a 31108TCV but its not workingso i press ctrl+c and then it says press ctrl+l to go into recovery mode so i do then i do the commands below  cmdline recoverymode=1 dir boot n3000-uk9-kickstart.6.0.2.U6.8.bin co...

hi all,how do you reset the above switch as theres no physical reset button, so i imagine its all done via command lineis it this write erase reload System configuration has been modified. Save? [yes/no]: n Proceed with reload? [confirm]y delete f...