About igrahamit

igrahamit · 11-26-2023

Wondering if someone from Cisco can provide some additional information on the "Category 2" hidden commands referenced in these release notes: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9600/software/release/17-9/release_notes/ol-17-9...

igrahamit · 06-26-2019

I have the below topology set up in GNS3 running OSPF. R8 and R1 are ABRs, Area 0 is on on the left and Area 1 is on the right. R3, R4, and R5 are redistributing some loopback interfaces into Area 0. When I run show ip ospf database asbr-summary on E...

igrahamit · 04-08-2019

After reading the NGFW Policy Order of Operations guide here, https://www.cisco.com/c/dam/en/us/td/docs/security/firepower/Self-Help/NGFW_Policy_Order_of_Operations.pdfI am even more confused about how the firepower device processes rules. According ...

igrahamit · 02-09-2019

My question is two-part, the first question is, what are my options for configuring QoS on the 4K platform? I can't find any Auto-QoS type commands. Is my only option here to hand-craft the QoS maps? And second: Is there a reference sheet for the que...

igrahamit · 07-01-2019

Thank you, I have cleared the ospf process and also fully rebooted all routers in this topology. I can only assume at this point that this may be a bug in the IOS, likely cosmetic. Since we can reach R1 from R8 within area 1, and also see it's Type 1...

igrahamit · 07-01-2019

HI Giuseppe, Thank you for your continued assistance. I have attached the .txt with the output from the show commands you requested.

igrahamit · 06-29-2019

Hi Giuseppe, When I update the router-id to reflect the same IP as the interface in Area 1, I am still getting the same message. So even when the adv-router ID is an IP address in the same subnet as the other ABR, it is still listing the Adv-router n...

igrahamit · 06-27-2019

Hi Giuseppe, Thank you for that explanation. I have one more question regarding the reachability of the router based on RID. My understanding is that OSPF algorithm is recursive, so even though the RID of 0.0.0.8 is not a reachable IP, the router wou...

igrahamit · 05-11-2019

Thanks Mike, I think I understand the order of operations, but I'm trying to figure out if there is a discrepancy in the guide I'm reading, since it it proposing to make a 443 blacklist ACE in the ACP before the application detection ACE for allowing...

Member Since	‎01-05-2019 12:13 PM
Date Last Visited	‎12-03-2023 09:44 AM
Posts	9

User Statistics

User Activity

Category 2 Hidden Commands

OSPF Dual ABR and Type 4 LSA reports adv Router is not-reachable

NGFW Policy Order of Operations

ISR 4K QoS Capabilities

Re: OSPF Dual ABR and Type 4 LSA reports adv Router is not-reachable

Re: OSPF Dual ABR and Type 4 LSA reports adv Router is not-reachable

Re: OSPF Dual ABR and Type 4 LSA reports adv Router is not-reachable

Re: OSPF Dual ABR and Type 4 LSA reports adv Router is not-reachable

Re: NGFW Policy Order of Operations