Additional Info:on SG300 assigning a VLAN via CLI works with: switchport trunk allowed vlan add 123on SG350 the command is executed without errors, but is not visible in the config (either running nor startup) and as well it does not change anything ...

I have a similar Problem using the OID's o0oinsomniao0o mentioned (.1.3.6.1.2.1.17.7.1.4.3.1.2 and 4). As with any other Switches from HP, Enterasys and as well cisco SG300 it is possible to even get the VLAN-assignment as well to set the VLAN on por...