This is the network architecture I have, in the attachment. There are clients at CE1 which need to speak to the clients int CE2. For this communication, they need to take the MPLS path but in case the MPLS path fails then it should choose the Metro E...
I have IP SLA running in the north-bound [A]. The redundancy works fine, however, on Router 1 and 3 I have configured Stateful NAT for the traffic leave out [B]. The NAT translation occurs but the NAT tables are not exchanged between router 1 and 3. ...
I am configuring the hostname of my cisco XR using ncclient. But I am receiving bellow an RPCError-Traceback (most recent call last):
File "obj4.py", line 13, in <module>
edit_result = device.edit_config(target='running',config=host_name, defau...
I have a Ubuntu machine which acts as a TFTP Server. I want to configure my cisco ios routers to take configuration from this TFTP server at boot time.I have a few doubts- Where do I store the configuration file for my cisco router in the TFTP Server...
I have a DHCP Server which is an Ubuntu machine. I am trying to configure cisco IOS routers using dhcp. The routers are configured to receive fixed-DHCP IPs, however, dynamic DHCP configuration works but the fixed-DHCP it is not working. Ubuntu [DHCP...
I configured this in dhcpd.conf, but still doesn't work. host R2 { hardware ethernet CA:02:3B:E3:00:08; fixed-address 198.51.100.5; filename "tftp://198.51.100.2/TXJla-outgoing/R1.txt"; option tftp-server-name "198.51.100.2";}
I am trying to use the ZTP approach to configure my router [R2]. My Ubuntu machine is both DHCP and TFTP server.Ubuntu [DHCP Server]: 16.04.5 LTS Cisco Router [DHCP Client]: 7200, version 15.2(4)S5This is the python script- ztp.py. ztp.py is stored i...
No, the L3 Switch does not have IP-SLA configured on it. My L3 Switch has some networks configured on it which need to reach to the networks beyond R1 and R3. All the routes from L3 Switch need to pass through R2 only and from R2 these networks take ...
