About e.beaudoin

e.beaudoin · 12-21-2011

http://pastebin.com/1dMn7XYgThis is the code I was trying to use.I am trying to connect SW 1 to R1 and R2 and SW 2 to R1 and R2.My topology is for testing, I have a pc connect to SW3 that is connected to SW 1 and SW 2.When I get th is figured out,...

e.beaudoin · 12-13-2011

Hey there, I am quite new to this whole networking scene. any help would be greatly appreciated, And do do expect to hear the "look at the basic CCNA".But let me try to ask anyways, in hopes some one can shed some light on this.So, as I said I am ver...

e.beaudoin · 12-06-2011

Hi, I have a router with a few computers connected to it.These computers are subneted with a /26 255.255.255.192 There is a computer for each subnet. .2 .66 .130 .194I am trying do deny access to the outgoing port F1/0 for ips ranging from 10.10.9.63...

e.beaudoin · 12-07-2011

Thanks, it works well now. When I tried to deny on the interface of the 64 network I did it wrong. I was trying to deny its destination thinking I can target the interface 10.10.2.1 but it wasnt destined there, it was just passing through.Now I under...

e.beaudoin · 12-07-2011

Hey Jon, thanks for the reply.I have been pinging only from the clients.It works great when nat is not set up. Everything makes it to the next router through my static routes.(also I have a static route from 192.168.1.0 /24 so everything exiting shou...

e.beaudoin · 12-07-2011

Hey Jon, thanks for the reply.I am trying to deny 10.10.1.64 - 127 but allow everything else to be nated.My problem seems to be that everything is getting denied meaning 10.10.1.0 - 10.10.1.255.Id like only to deny 10.10.1.64 - 127 while everything e...

e.beaudoin · 12-06-2011

enable conf t int e2/0 ip add 10.10.1.1 255.255.255.192 ip nat inside no shutdown int e2/1 ip add 10.10.1.65 255.255.255.192 ip nat inside no shutdown int e2/2 ip add 10.10.1.129 255.255.255.192 ip nat inside no shutdown int e2/3 ip add 10.10.1.193 2...

e.beaudoin · 12-06-2011

enableconf tint e2/0ip add 10.10.1.1 255.255.255.192no shutdownint e2/1ip add 10.10.1.65 255.255.255.192no shutdownint e2/2ip add 10.10.1.129 255.255.255.192no shutdownint e2/3ip add 10.10.1.193 255.255.255.192no shutdownexitaccess-list 1 deny 10.10....

Member Since	‎12-06-2011 10:53 AM
Date Last Visited	‎08-18-2017 03:50 AM
Posts	9

User Statistics

User Activity

HRSP, Bridging Interface

Noob Question

Access-List Deny Range of Ip subnet

Re: Access-List Deny Range of Ip subnet

Re: Access-List Deny Range of Ip subnet

Access-List Deny Range of Ip subnet

Re: Access-List Deny Range of Ip subnet

Re: Access-List Deny Range of Ip subnet