About hiepduong

hiepduong · 03-19-2020

i have SFP & SFP+ from UBNT and i used it for Cisco switch MM or SM model for both SFP & SFP+, they are working perfect on Cisco 9300 or 3650 (w latest IOS) but when it come to Catalyst C1000 or 2960 then it is "unknow" It still able to detect when ...

hiepduong · 02-01-2019

My topology Anyconnect -- ASA -- IPSec -- VyoS I dont have any issues with ASA to VyOS, both remote network can ping no problemI dont have any issues with AnyConnect to ASA , both remote network can ping no problem Problem is AnyConnect cannot reach ...

hiepduong · 03-20-2020

I did copy but no luck and im totally agreed that non Cisco SFP may not get any support by TAC but the Cisco SFP is too expensive if compare with the other :-( On the other hand, the China SFP is working perfect without any issues and we cannot use t...

hiepduong · 02-01-2019

Because the anyconnect zone stay in outside so that no NAT need to be involve here"same-security-traffic permit inter-interfacesame-security-traffic permit intra-interface"will help in this caseLast thing relate to AD in remote site which ASA outside...

Member Since	‎02-01-2019 07:33 AM
Date Last Visited	‎03-20-2020 12:07 AM
Posts	4

User Statistics

User Activity

Non Cisco SFP with C1000 & 2960

Anyconnect cannot reach to server in remote site with IPSec

Re: Non Cisco SFP with C1000 & 2960

Re: Anyconnect cannot reach to server in remote site with IPSec