About javi1988

javi1988 · 04-06-2024

Hello all,I have a FMC virtual running in a KVM and I get a license error.Seems in the past the needed one for 2 devices was SF-FMC-KVM-2-K9 but I can't find the new one.Any one knows wich is the current one for KVM FMC virtual?Thank you

javi1988 · 09-28-2023

Hello all, I hava an issue with an FTD firewall version 7.0.4.I have created a PBR to route from a source to a destination and, when I filter the connection events, it works except for the traffic when the apprication client is DCE/RPC then the egree...

javi1988 · 12-16-2020

Hello all, I have enabled DHCP Snooping with " ip verify source port-security" and it works without problem, but the issue is that the entries in the binding tables are not removed after a PC is disconnected so if a laptop user moves from a port to a...

javi1988 · 11-21-2020

Hello all, We have a Firepower firewall with FMC and a Syslog server.We use some IPSec VPNs poitn to point and we want to enable syslog logs for troubleshooting.I have added in device, Platform Settings, Syslog Settings some Syslog IDs like 713050 o...

javi1988 · 10-31-2020

Hello all, I have 2 ASA connected with a similar configuration than the attached file. If I need to connect, let´s say, 10 more ASAs between them (full mesh). What is the easiest way to do it? I have to create new tunnel-group and a interface for eac...

javi1988 · 09-28-2023

Yes sure, thank you.The access list has only the same source and destiation used in the connection events list.

javi1988 · 11-21-2020

In these two images you can see the config that I have changed.

javi1988 · 09-17-2020

We had this issue during more than 11 months and the solution was to update the IOS to a newer version.

javi1988 · 08-23-2020

First of all, thank you for your answer. For example, I get an email every time that there is a security intelligence event. Let`s say that I´m receiving a lot of emails because an event coming from an IP x.x.x.xIf I create a rule in the first ACP li...

javi1988 · 07-17-2019

sw-01 is a Core sw that is connected to many access switches.All trunk interfaces between the sw and access switches have this config in both sides: interface GigabitEthernet0/3 -4switchport trunk native vlan 445switchport trunk allowed vlan 1,55,60,...

Member Since	‎02-01-2019 02:19 PM
Date Last Visited	‎04-12-2024 12:48 AM
Posts	18
Total Helpful Votes Received	5

User Statistics

User Activity

FMC virtual needed license

PBR issues when application client is DCE/RPC

DHCP Snooping

VPN Syslog

VTIs between ASAs

Re: PBR issues when application client is DCE/RPC

Re: VPN Syslog

Re: ip helper address not forwarding

Re: Firepower Data Flow

Re: ip helper address not forwarding