About jzapp

jzapp · 09-17-2013

I have a CME with 9971 SIP phones.I would like to disable the Call Waiting Tone.Thank you.

jzapp · 06-14-2010

I have a 2821 connected to a very old Nortel PBX running software version 17. We have configured a T! CAS between the two using E&M Wink Start. The circuit is clean while idle. However, the errors start to increment when the Nortel side starts to ...

jzapp · 09-17-2013

I would like to keep the Call-Waiting Feature, but disable the tone you hear when speaking to a customer.

jzapp · 06-18-2010

After several command changes on both sides including different E&M modes, we moved the router next to the PBX to isolate any cable issues. No significant difference. We decided to change to AMI and SF(D4). We had to remove the line card from the ...

Member Since	‎08-06-2003 12:56 PM
Date Last Visited	‎02-05-2021 10:47 AM
Posts	5
Total Helpful Votes Received	5

User Statistics

User Activity

CME SIP Call-Waiting tone disable

T1 CAS to Nortel version 17 with intermittent Line Code Violations

CME SIP Call-Waiting tone disable

Re: T1 CAS to Nortel version 17 with intermittent Line Code Viol