About Ben Jenkins

Ben Jenkins · 03-20-2019

Hi I have deployed our collector and have discovered devices and uploaded successfully to Cisco, but no information is seen on the portal. Please can someone help?

Ben Jenkins · 08-06-2018

We've configured the VMM Domain, AEP and installed the AVE but it fails to obtain a TEP address even though everything appears to be configured correctly? cisco-ave:~$ ip address show dev kni05: kni0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdis...

Ben Jenkins · 02-27-2017

Hi, Is there any documentation on how you add the "4th" APIC in a DR scenario. Our environment is set-up for ACI Multi-pod with 2 APICS in Primary DC and 1 APIC in Secondary DC. Primary DC (Controller ID/No Controllers/POD ID): APIC01 - 1/3/1 APIC0...

Ben Jenkins · 11-28-2016

I have hosts with multiple uplinks that connect to separate L2 disjointed networks. Each AVS instance will have uplinks that connect to the different networks, is it possible to install multiple AVS switches on the same host? Thanks

Ben Jenkins · 11-28-2016

I have hosts with multiple uplinks that connect to L2 disjointed networks. Is it possible to install multiple AVS switches on the same host. Each AVS instance will have uplinks that connect to the different networks.Thanks

Ben Jenkins · 03-22-2019

I would like to ask some additional info - Is there a way for the collector to identify our Cisco LWAPs?What is Cisco's recommendation for subnet scanning? Can we do 10.0.0.0/8?Thanks

Ben Jenkins · 03-22-2019

Hi Yes can now see the data. Thank you so much for sorting this.

Ben Jenkins · 08-02-2018

Can these instructions be used to integrate OKTA and ISE for Device Administration? I am working on using MFA for device administration for when we access our network devices. Thanks

Ben Jenkins · 03-16-2017

Also seeing this issue not just on Avaya 9650 but all Avaya models that we have. We dont just see this for failed devices, we see random successfully authenticated devices have this issue. Mainly when the users place the laptop in Hibernate mode. ...

Ben Jenkins · 02-16-2017

Great, thanks Tomas! I was missing - "Static node management addresses" for the APICs Best Regards Ian

Member Since	‎10-13-2012 01:12 PM
Date Last Visited	‎03-24-2019 10:31 AM
Posts	24

User Statistics

User Activity

Collector not seen in portal

AVE failing to obtain DHCP TEP address

Procedure for adding 4th APIC in DR Scenario

Installing multiple AVS switches on the same host

Multiple AVS switches on the same host

Re: Collector not seen in portal

Re: Collector not seen in portal

Re: Notes on Okta as SAML IdP

Also seeing this issue not

Great, thanks Tomas!