Recently my office got an access point - (AIR-CAP2602E-C-K9) which is not synchronizing with controller (AIR-CT2504-5-K9 )as it is in domain A , all other AP also in domain A. Now can i change the domain of access point or what is the possible solut...
I have a new cisco WS-C3850-24PW-S switch , after 2 days running suddenly it is down ! only power module get power and 2 led of module is green but rest of the led in front side (besides of mode button) & back side (console & managemant) are off. Ev...
I got one CISCO892 router with Cisco 890 Adv IP svcs NPE License PAK( PAPER) for my customer. But inside router i saw advace ip service license already factory default. SO my question is why cisco sent paper license again ? (part no is - SL-890-AIS-N...
We have a cisco 3560X L3 switch deployed in one of our customer location. As per customer requirement we need to enable OSPF md5 authentication with type 5 encrypted password. But looks like Type 5 password encryption is not supported for OSPF a...
I am facing problem with vpn clinet. My router model is 2951sec/k9, (no SSL vpn lic) vpn is configured but through vpn clinet we can access only primary public ip , secoundary ip can't accessable by cisco vpn client. any one please help ?
Thanks a lot for your response. Can you please clear me that, it is not possible only for switch (3560x with ip service lic) ? becasue i am having CISCO 2821 Router & the MD5 type 5 password encription is taking for that router.
Thank you Reza sharifi for your reply. Actually i handover that switch to my customer so can't post the sh lice & sh ver right now. but in that switch it was index like your index 3index: 1 Feature: ipservices Version: 1...
hi guys ,i upgraded my cisco 2821 rommon C2800NM_RM2.srec.124-13r.T11. now i get the dev Devices in device table: id name flash: compact flashbootflash: boot flashusbflash0: usbflash0usbflash1: usbflash1 eprom: eprombut after conne...
