Hello - I am using 3.2(4e) version. I am going to add a new Spine to the ACI Fabric. How to upgrade the new Switch. Should I use Firmware Group or Maintenance Group. Looks like the Maintenance group don't allow me to select individual Switch and it i...
Hello - What is the purpose of Interface command "ip ospf passive-interface" Can I understand that by enabling the interface command "ip ospf passive-interface" prevents this interface to form OSPF neighborship, but still advertise it subnet in the O...
Hello All - Just looking for help to understand some basics in choosing Spine and leaf in ACI. In a Datacenter, we use - ACI Spine as Nexus N9K-X9732C-EX (Sup-A) with firmware aci-n9000-dk9-13.2.4e.bin- Leaf as N9K-C93108TC-EX with image aci-n9000...
Hello - I have a requirement to extend a VLAN across three Datacenters as shown in the diagram attached. I am using Unicast deployment. Existing Configuration of SITE-Ainterface Overlay1description /// Vlan 200 OTV Overlay to B///otv join-interface E...
Hello All - Can anybody help me understand the difference between "Match Prefix AND Routing Policy" and "Match Routing Policy Only". This option you can find here: "External Routed Network"-->L3OUT-->"Route Maps/Profiles"-->"default export" On what c...
Adding another question: What is the purpose of the ROUTE-MAP/PROFILE when we can specify the exact Subnet & Prefixes Under Network and mark it as "EXPORT ROUTE CONTROL SUBNET"? Practically I am seeing a case, where we configured a subnet 10.100.0.0/...
