Hey guys,I am going to post this with only about half of the information needed to solve the problem but I just want to get the question out there. I don't have access to my config at the moment and I haven't had a chance to get to the console of thi...

Can anyone tell explain to me the difference in the two commands?I was having issues with some port forwarding where it was working, but shortly after the connection to the inside webserver was made any network off of the router couldn't be accessed ...

Hey guys,Quick question. I know it's not best practice but I have a network that currently all on VLAN 1 and can't be migrated to a new VLAN easily. Can I connect an access port in VLAN 1 to and access port on VLAN 20 on another switch? It's all the ...

Hello again,This is a continuation of my last post in which I need to apply ACLs to the physical ports within Etherchannels. The switch is a Catalyst 2970 running IOS 12.2. These Etherchannels are configured as trunks with 2 VLANS allowed on each tru...

Hello everyone,It's been awhile since I've had a project working Cisco equipment and I have a quick question on whether I can do something or not or how to get around it.I am using a catalyst 2970 switch for 2 vlans. Corporate data and a separate VLA...