Using a RV180W SER17410069 Firmware 1.0.3.10 When configuring the page looks like frames, I can only see the top 1/8 of the page. Can scroll down but still only about a 1/3 of the page. 2/3s at the bottom is open and could be used.I there a wa...
I would like to configure two VLANs on my SG-200-26p switch. Using port 25 for VLAN 1 and port 26 for VLAN 2 coming from my WRVS4400N. Then assign individual port (1-24) to one or the other VLAN.My router has 2 VLANs private (1) Public (2). Private i...
I would like to download VPN Clien 5.0.06 however the download page will not let me. As a registered partner reseller I'm told I should have access to the download.Can any offer any help?Thanks a bunch
Marty, thanksI was able to create the "Guest" without a problem.However the rest is where I get confused. I have be wrong but I expected to run cat6 from port 1 on the WRVS4400 to port 25 on the SG200 and another cable from port 2 (public) on the WR...