On nx0s9.3.7. I had a VRF configuration on the SVI, but did not previously define the context before creating the interface. Once the VRF context command was entered, then the interface fully configured and save was successful.
I have 9Ks - On 7.0.3.i7.6 and 9.3.1 code I saw this issue. I was able to use the hidden command sync-snmp-password passwd userabc 1.2.3.4 passwd - is the password of the useruserabc- TACACs authenticated account1.2.3.4 - TACACs server address. ...
The logging server level of 5 is default. "use-vrf default" is default. Neither will appear in the running configuration of nx-os. Not sure at what version this changed.
logging server 1.1.1.1 5 use-vrf management <--If I specify a vrf other th...
switch01(config)# loggin server 1.1.1.1 5 use-vrf defaultswitch01(config)# sho run | in "logging s"logging server 1.1.1.1 ----notice no options displayswitch01(config)# loggin server 1.1.1.1 facility syslogswitch01(config)# sho run | in "logging s"l...