About DEENA SLOAN

DEENA SLOAN · 07-12-2019

We have installed a C9300-48P and the downlink is on C9300-NM-4G/1000baseSX which is connected via MM.The link connects to WS-C4507R-E and the uplink is on WS-X4306-GB/1000baseSX. UDLD is enabled globally on theWS-C4507R-E and C9300-48P and is const...

DEENA SLOAN · 07-26-2017

I have a WS-C3560X-24P that is running Version 15.2(2)E3 getting this error 1 min to 5 min intervals. I cannot find anything on this error to explain why it is getting this. Is there a bug that I am missing? Jul 26 08:01:54.130 EDT: %IDMGR-3-INVALI...

DEENA SLOAN · 05-17-2017

I have received this message %SYS-2-INPUTQ: INPUTQ set, but no IDB, ptr=3A7A14C0 on a WS-C3650-24PD running CAT3K_CAA-UNIVERSALK9-M, Version 03.06.03E . Is there a currently an open Bug on this error and if so is there a fix or workaround on this? Th...

DEENA SLOAN · 05-09-2011

We have Router1 and Router 2 interface's that are trunked to a switch and Vlan/Vlans that flow through the interface that is trunked.When the physical interface on Router 1 fails it goes to standby but the vlan interface is staying active on router ...

DEENA SLOAN · 04-09-2010

We are trying to get wireless hand held scanners that talk to a GUI on the laptop up and running and found that The laptop has an application installed that sends network broadcasts out to try to communicate with the hand-held scanner. Once the scann...

DEENA SLOAN · 01-13-2020

There has been no response on this Bug. Can someone from Cisco chime in and answer of impact of this error.I have one that has 10,161 alarm occurrences. Occurrences are incrementing continuously and filling up the log. :

DEENA SLOAN · 07-12-2019

Thank you I will try that in my troubleshooting.

DEENA SLOAN · 07-12-2019

4K Router Yes we have vlan 1000 on all of the network equip. That is our management Vlan.Interface Gi5/4---Port enable administrative configuration setting: Follows device defaultPort enable operational state: EnabledCurrent bidirectional state: Unkn...

DEENA SLOAN · 07-12-2019

The Router end WS-C4507R-E is getting error-disabled

DEENA SLOAN · 07-12-2019

Yes the Interfaces are trunked. Here is the config for the ports: WS-C4507-RE Interface G5/4 (We currently have the interface shutdown)interface GigabitEthernet5/4 description ***S2080 A/L*** switchport trunk native vlan 1000 switchport mode trunk se...

Member Since	‎04-09-2010 05:11 AM
Date Last Visited	‎03-20-2023 04:18 AM
Posts	14
Total Helpful Votes Received	5

User Statistics

User Activity

C9300-48P/C9300-NM-4G/1000baseSX connected to WS-C4507R-E/WS-X4306-GB/1000baseSX with UDLD enabled going in err-disable

%IDMGR-3-INVALID_ID: bad id in id_get (Out of IDs!) (id: 0x0) What does this mean

CSCsy48209 - Tracebacks - percentSYS-2-INPUTQ on SRD1

HSRP Failing with Vlan and Physical interface

WCS 4404 Ramifications of turning on Broadcast forwarding

Re: CSCuw29304 - Cat3850 IFM-3-LE_ERROR/IFM-3-IFB_ERROR after switch reload/failover

Re: C9300-48P/C9300-NM-4G/1000baseSX connected to WS-C4507R-E/WS-X4306-GB/1000baseSX with UDLD enabled going in err-disable

Re: C9300-48P/C9300-NM-4G/1000baseSX connected to WS-C4507R-E/WS-X4306-GB/1000baseSX with UDLD enabled going in err-disable

Re: C9300-48P/C9300-NM-4G/1000baseSX connected to WS-C4507R-E/WS-X4306-GB/1000baseSX with UDLD enabled going in err-disable

Re: C9300-48P/C9300-NM-4G/1000baseSX connected to WS-C4507R-E/WS-X4306-GB/1000baseSX with UDLD enabled going in err-disable