About Mohax

Mohax · 03-31-2019

Hi, is a access list needed to be implemented in the router for this case?. Guest Network VLAN 20 must be separated from the rest of the VLANS. Thanks a lot, I've attached the file below

Mohax · 03-29-2019

Hi, im trying to implement IPV6 SLAAC on both routers in order to give the autoconfiguration to the rest of the laptops. I went trough the method but no luck so far, when I go to autoconfig for ipv6 on the computers nothing pops up. Thanks in advance

Mohax · 03-28-2019

Hi, Im kind of new to this and im trying to do my best, I made the the two network setup and everything is fine. Configured the VLANS , trunk and access ports and the router on a stick. However I'e tried many routing methods in order to connect both ...

Mohax · 03-31-2019

an for tge reply, I've alreadyThanks for the reply, I've already solved the issue by implementing acl deny list on the sub-interface of vlan 20T

Mohax · 03-28-2019

If you could take a look at the ptk file thank you Regards

Mohax · 03-28-2019

With the default routing method Im trying to get traffic from laptop to another one in the different networks. Im kind new so i don't really get the terms you're mentioning

Mohax · 03-28-2019

Im sorry but how can I do that?thanks

Member Since	‎03-28-2019 04:20 PM
Date Last Visited	‎04-07-2019 04:55 PM
Posts	7

User Statistics

User Activity

Guest VLAN block access to other VLANS

IPV6 SLAAC

Routing, connecting two different networks

Re: Guest VLAN block access to other VLANS

Re: Routing, connecting two different networks

Re: Routing, connecting two different networks

Re: Routing, connecting two different networks