About Tothdav

Tothdav · 04-01-2019

Hello, I tried to configure an NTP server on my SPA112 device to sync the time, but it keeps displaying wrong time. When I configure the NTP server (pool.ntp.org), the time is synced well immediately, but when the device re-registers itself to my voi...

Tothdav · 04-07-2019

Sorry for the late answer.Here are the dates from the SIP package: This was in the Frame group in Wireshark and this is the package arrival time on the PC:Arrival time: Apr 7, 2019 20:08:38.770537000 Central European Summer Time And this date was in ...

Tothdav · 04-03-2019

Sorry, the 'it seems' were not the best words :) I have checked the SIP packages and in them I found that the time has 3 minutes difference and timezone difference. So I think if I cannot turn off the SIP date applying, I can only get the correct dat...

Tothdav · 04-02-2019

Thank you for your help! You can, of course. Just catch SIP packets (PBX's response to REGISTER request) and check the date inside (SIP protocol is text protocol, so you can just read the text).It seems my provider sends an almost correct time (-3 mi...

Tothdav · 04-02-2019

Unfortunately it is not my SIP server, so I cannot check it. This is my internet provider's server who provides me voip service. That is why I wanted to use different NTP server.

Tothdav · 04-02-2019

Thanks for your response! The ATA is running on the latest firmware: 1.4.1 SR1 I tried at least 5 NTP servers on my network and all of my devices can sync (SPA112 is included as well), but only the ATA looses the correct time and only when it registe...

Member Since	‎04-01-2019 01:09 PM
Date Last Visited	‎04-09-2019 12:16 PM
Posts	6

User Statistics

User Activity

SPA112 - incorrect time after SIP registration

Re: SPA112 - incorrect time after SIP registration

Re: SPA112 - incorrect time after SIP registration

Re: SPA112 - incorrect time after SIP registration

Re: SPA112 - incorrect time after SIP registration

Re: SPA112 - incorrect time after SIP registration