Ravs
Level 1
Level 1
Member since ‎04-04-2019
‎02-23-2022

User Statistics

  • 46 Posts
  • 1 Solutions
  • 5 Helpful votes Given
  • 10 Helpful votes Received
Recent Badges
10 Helpful Vote
1 Helpful Vote
1 Accepted Solution
20 Replies
10 Replies
5 Replies

User Activity

Hi Guys I am finding it difficult to identity the root cause of the copy failure when trying to copy the image 17.3.4 from the TFTP Server to the Cisco 9500-48Y4C. Command used is : install add file tftp://10.10.10.10/cat9k_iosxe.17.03.04.SPA.bin I c...
Hi Guys. I need to upgrade the 4451 from 16.9.2 to 16.9.5. Humbly requesting for your advice on the steps. Currently on the show version, it readsSystem image file is "bootflash:isr4400-universalk9.16.09.02.SPA.bin"and show startup-config has only:bo...
Spoiler  Hi Guys, We have the 3850-12XS-E in the Install Mode. I have few queries around it and will be very grateful for your assistance. 1. The Verify /md5 flash: cat3k_caa-universalk9.16.09.05.SPA.bin     The md5 value match between Cisco.com and ...
Hi Guys We have this issue.When we chose IOS distribution to 8 switches, it just displays Yet to Start Operation. Then chose only one device for IOS distribution, it still displays Yet to Start Operation. Yesterday we managed to successfully distribu...
Hi Guys We need to change the MTU to 9192 on just one port on the 3850 Switch. The rest of the 11 ports will still be at 1500. Did some research and it's just stating System MTU which will change the MTU on all the ports.  We cant change the System M...
Community Statistics
Member Since ‎04-04-2019 12:42 AM
Date Last Visited ‎02-23-2022 12:07 AM
Posts 46
Total Helpful Votes Received 10
Helpful Votes From
Helpful Votes Given To