About machine23

machine23 · 03-28-2024

Hi All , I am in the testing phase of migrating to a 9300. So far I have done the below.3850 running 16.3.6 and 9300 updated 17.09.04aI have copied the start-up config to the 9300 - all looks ok apart from the usual ip routes , some interfaces not ...

machine23 · 06-02-2023

Hi All , I have 2 separate networks each with Core switches , say network 10 and network 192 and wish to connect the 2 networks and also the relevant vlans with 2 cables running from one to the other for a little bit of resilience but it isn't that p...

machine23 · 05-07-2023

Hi All , Have been at it for a long time ! The connection wont establish Attched is the config applied on the ASA which is generated on Azure*Configuration of the ASA -:Hardware: ASA5516, 8192 MB RAM, CPU Atom C2000 series 2416 MHz, 1 CPU (8 cores):...

machine23 · 02-20-2023

I’ve got 2 ASA’s side by side and it’s connected via IPsec - it works great Since they in the same site - I’d like to use a physical connection (faster/secure) and link the 2 firewalls and connect the internal networks on both ASA’sSo what is the be...

machine23 · 01-16-2021

Hello All , I have added an SSL cert for the ASA - ciscoasa.ladderbar.com (195.36.189.55) and applied the certificate on the SSL settings on the ASA so when users use anyconnect using the DNS name (ciscoasa.ladderbar.com) it works good and no risk m...

machine23 · 03-28-2024

Thanks a lot for the advice above

machine23 · 06-06-2023

Hi I have done it they way you guys have said and that has worked , i can ping the networks , so technically now i should have access to all the vlans from sw1 to sw2 and sw2 to sw1 right?

machine23 · 06-06-2023

Sw1 is in rapid pvst mode and other is on mst mode

machine23 · 06-06-2023

Ok so one switch will have svi 192.168.77.1 and other switch svi 192.168.77.2 ? Thanks

machine23 · 06-06-2023

So basically I want to connect sw1 and sw2 and make sure the clients in both subnets can ping and access each other… just put up a picture for ref…thanks again

Member Since	‎04-04-2019 01:19 AM
Date Last Visited	‎04-18-2024 06:53 AM
Posts	52
Total Helpful Votes Received	6

User Statistics

User Activity

Catalyst 3580 to 9300 Migration

Switch to Switch ( L3) - Connection Solutions

ASA(9.16) to Azure S2S ( Using IKV2+VTI+BGP) Not working

ASA to ASA Link (Cable)

SSL Certificate on ASA - Missing something?

Re: Catalyst 3580 to 9300 Migration

Re: Switch to Switch ( L3) - Connection Solutions

Re: Switch to Switch ( L3) - Connection Solutions

Re: Switch to Switch ( L3) - Connection Solutions

Re: Switch to Switch ( L3) - Connection Solutions