Based on this link, Cisco ACI is actually based on the Cisco Nexus 9000 family. The hardware for it is based on the Cisco Nexus 9000 family of switches.https://www.sdxcentral.com/data-center/definitions/what-is-cisco-aci/ But when Cisco Nexus or IOS ...
What is the command to get model name for each controller, spine, and leaf via CLI?show version don't have it. APIC03# show version
Role Pod Node Name Version
---------- ---------- ------...
GUIAPIC > Tenant > common > Security Policies > Filters I've been trying various commands to get this output via CLI/SSH but didn't work so far.ACI# show running-config all | grep -nC 3 Filters
ACI#I also tried to grep "Filters" from "sh run" but did...
This is how we get Date and Time Policy via GUI On the menu bar, navigate to FABRIC > FABRIC POLICIES.
In the Navigation pane, perform these actions:
Expand Pod Policies
Expand Policies
Select Date and Time Reference: https://www.cisco.com/c/en/u...
ACI PathTenants > Networking > External Routed Networks >In the area with the routing protocol check boxes, there are a few options such as BGP, OSPF, and EIGRP.In this image, BGP and OSPF have been enabled.What is the equivalent CLI command for this...
Unfortunately, those commands are not working on this ACIaci# show firmware repository
Incorrect command "show firmware repository"
aci#aci# show firmware repository detailIncorrect command "show firmware repository detail"aci# aci# configure
bash: c...
